Chase Tactical 3S9M Level III++ Rifle Armor Plate - DEA Compliant

$424.96 424.96

Available Options

Chase Tactical 3S9M Level III++ Rifle Armor Plate DEA Compliant (MULTI CURVE)

 Chase Tactical 3S9M Level III++ Rifle Armor Plate -  DEA Compliant
 

Description

Chase Tactical 3S9M Level III++ Rifle Plate DEA Compliant (MULTI CURVE)

The Chase Tactical 3S9M Series are NIJ 0101.06 Compliant Stand Alone Plates. The 3S9M is also DEA Compliant taking the ballistic performance above and beyond NIJ 06 Standards. Providing protection from modern munitions, the CT-3S9M is an ideal choice for end users seeking a high performing ballistic resistant armor plate.

  • Protection: Level III++ Stand Alone High Velocity Rifle
  • NIJ Standard 0101.06: This product has been independently tested by an NIJ approved laboratory according to the NIJ standard of protection
  • DEA: Hard Armor Protocol Compliant
  • RST: Rifle Special Threats Validated
  • Material: Ceramic strike face composite backing
  • Exterior Cover: 1000D Cordura®, Textured Nylon, Polyester Veil, Polyurea
  • Cut: The 10” x 12” shooters cut plates are considered nominal and the actual measurement is 9.5” x 11.5”
  • Thinness:  1.15”
  • Warranty: 5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship
  • Disclaimer: Text shown on strike face is for marketing purposes only. The actual labels on Chase Tactical products are NIJ approved self-adhesive labels.
  • MADE IN THE USA

Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded.  LE/MIL only shipments to CT.  Please allow 2-3 Weeks for shipment.

 

 Additional information
Weight 4.00 lbs
Plate Size & Cut
10.00"X13.25" SAPI/ESAPI, 10"X12" Shooters Cut, 11.00"X14.00" SAPI/ESAPI, 7.50"X11.50" SAPI/ESAPI, 8.75"X11.75" SAPI/ESAPI, 9.50X"12.50" SAPI/ESAPI

 

Size Chart

Size Curve Cut Weight (lbs/kg)
7.5 x 11.5 Multi Curve SAPI (XS) 4.0 / 1.8
8.75 x 11.75 Multi Curve SAPI (S) 5.2 / 2.4
9.5 x 12.5 Multi Curve SAPI (M) 6.0  / 2.7
10 x 13.25 Multi Curve SAPI (L) 6.9  / 3.1
11 x 14 Multi Curve SAPI (XL) 7.6 / 3.4

 

 

Specification

SPECIFICATION
PRODUCT NAME CT-3S9M
PROTECTION LEVEL III+ (MULTI STRIKE)
NIJ CPL 3S9M
CONFIGURATION SINGLE CURVE
THICKNESS 1.15″
TYPE OF MATERIALS COMPOSITE / CERAMIC
PROTECTIVE COVER CORDURA

 

 

Weapon Types

WEAPON TYPE AMMUNITION VEL (FT/S ± 30) VEL (M/S ± 9)
Rifle FN FAL 7.62 x 51 mm – M80 (NIJ 06) 2780 847
Rifle M60, M14, M240 7.62 x 51 mm M61 AP 2776 846
Rifle Draganov, PKM 7.62 x 54R LPS 2915    888
Rifle AK-47, M, SKS 7.62 x 39mm – API  2380  725
Rifle M-16, AR-15 5.56 x 45mm – M855/SS109  3117  950
Rifle M-16, AR-15 5.56 x 45mm -M193  3150  960
Rifle AK-47, M, SKS 7.62 x 39mm – Mild Steel Core  2380  725
Rifle AK-47, M, SKS 7.62 x 39mm- Ball  2380  725

 

Manufacturer:

Chase Tac

 

ABOUT THE LAW ENFORCEMENT AND CORRECTIONS STANDARDS AND TESTING PROGRAM

[Chase Tactical 3S9M Level III++ Rifle Armor Plate (MULTI CURVE) is NIJ 0101.06 Compliant - which is also DEA Compliant]

The Standards and Testing Program is sponsored by the Office of Science and Technology of the National Institute of Justice (NIJ), Office of Justice Programs, U.S. Department of Justice. The program responds to the mandate of the Homeland Security Act of 2002, which directed the Office of Science and Technology to establish and maintain performance standards in accordance with the National Technology Transfer and Advancement Act of 1995 (Public Law 104–113) to test and evaluate law enforcement technologies that may be used by Federal, State, and local law enforcement agencies. The Homeland Security Act of 2002 also directed the Office of Science and Technology to establish and maintain a program to certify, validate, and mark or otherwise recognize law enforcement technology products that conform to the standards mentioned above. The Standards and Testing Program is a basic and applied research effort that determines the technological needs of justice system agencies, sets minimum performance standards for specific devices, tests commercially available equipment against those standards, and disseminates the standards and the test results to criminal justice agencies nationally and internationally. The Office of Law Enforcement Standards (OLES) at the National Institute of Standards and Technology develops voluntary national performance standards for compliance testing to ensure that individual items of equipment are suitable for use by criminal justice agencies. The standards are based upon laboratory testing and evaluation of representative samples of each item of equipment to determine the key attributes, develop test methods, and establish minimum performance requirements for each essential attribute. In addition to the technical standards, OLES also produces technical reports and user guidelines that explain in nontechnical terms the capabilities of available equipment. The National Law Enforcement and Corrections Technology Center (NLECTC), operated by a grantee, coordinates a national compliance testing program conducted by independent laboratories. The standards developed by OLES serve as performance benchmarks against which commercial equipment is measured. Publications are available at no charge through NLECTC. Some documents are also available online at https://www.justnet.org/justnet.html. To request a document or additional information, call 800–248–2742 or 301–519–5060, or write: National Law Enforcement and Corrections Technology Center 2277 Research Boulevard, Mailstop 8J Rockville, MD 20850 E-mail: asknlectc@nlectc.org World Wide Web address: http://www.justnet.org The National Institute of Justice is a component of the Office of Justice Programs, which also includes the Bureau of Justice Assistance, the Bureau of Justice Statistics, the Community Capacity Development Office, the Office for Victims of Crime; the Office of Juvenile Justice and Delinquency Prevention, and the Office of Sex Offender Sentencing, Monitoring, Apprehending, Registering, and Tracking (SMART).


National Institute of Justic

(link to full pdf document)
Type III (Rifles) Type III hard armor or plate inserts
shall be tested in a conditioned state with 7.62 mm FMJ, steel jacketed bullets (U.S. Military designation M80) with a specified mass of 9.6 g (147 gr) and a velocity of 847 m/s ± 9.1 m/s (2780 ft/s ± 30 ft/s). Type III flexible armor shall be tested in both the “as new” state and the conditioned state with 7.62 mm FMJ, steel jacketed bullets (U.S. Military designation M80) with a specified mass of 9.6 g (147 gr) and a velocity of 847 m/s ± 9.1 m/s (2780 ft/s ± 30 ft/s). For a Type III hard armor or plate insert that will be tested as an in conjunction design, the flexible armor shall be tested in accordance with this standard and found compliant as a stand-alone armor at its specified threat level. The combination of the flexible armor and hard armor/plate shall then be tested as a system and found to provide protection at the system’s specified threat level. NIJ-approved hard armors and plate inserts must be clearly labeled as providing ballistic protection only when worn in conjunction with the NIJ-approved flexible armor system with which they were tested.